View Single Post
  #21  
Old 12-30-2011, 06:13 AM
whunter's Avatar
whunter whunter is online now
Moderator
 
Join Date: Dec 2003
Location: Metro Detroit, Michigan
Posts: 17,430
Answer

Quote:
Originally Posted by frankengrant View Post
Today I took the ole Benz for a ride for the first time in a few weeks and noticed the brakes were very mushy. I pulled over and the rear part of the reservoir, closest to the brake booster, was empty. The grommet at the bottom of the reservoir going into the master cylinder (right?) was a bit wet.

I refilled the brake reservoir and went for a drive, its a bit better but not all the way, I will bleed it this weekend.

Other than replacing that gasket, what else should I do?

Anyone who has replaced that gasket have a few tips for me?

Thanks!
Here are the parts you need.

Grommet, Brake Fluid Reservoir to Brake Master Cylinder (12 mm I.D) (2 Per Car)
MB# 000 431 09 50
ATE Brake Reservoir Grommet,W0133-1643032 - PeachParts


.
__________________
ASE Master Mechanic
https://whunter.carrd.co/

Prototype R&D/testing:
Thermal & Aerodynamic System Engineering (TASE) Senior vehicle instrumentation technician.
Noise Vibration and Harshness (NVH).
Dynamometer.
Heat exchanger durability.
HV-A/C Climate Control.
Vehicle build.
Fleet Durability
Technical Quality Auditor.
Automotive Technical Writer

1985 300SD
1983 300D
2003 Volvo V70

https://www.boldegoist.com/
Reply With Quote