You'd better check the runout first. The spindle nut should only tight enough for the outer washer to rotate and the hub and rotor should barely move. Make sure the hex socket bolt is tight.

Bushings could also be a problem.

Is the lateral support rod still in one piece and attached?

__________________
Regards

Warren

Currently 1965 220Sb, 2002 FORD Crown Vic Police Interceptor

Had 1965 220SEb, 1967 230S, 280SE 4.5, 300SE (W126), 420SEL

ENTER > = (HP RPN)

Not part of the in-crowd since 1952.