View Single Post
  #4  
Old 01-10-2012, 10:52 PM
charmalu charmalu is offline
Registered User
 
Join Date: May 2007
Location: Out in the Boonies of Hot, Dry, Dusty, Windy Nevada
Posts: 9,680
The 80 240D and the 80 300D manual transmission should be the Iron Box with the bolt on Bell Housing. so that should be the same.

Did You happen to get the all aluminum one piece 4-spd by chance? that one was used in the 82 & 83 240D. not sure what the 81 had.
It could be the 300D had the one piece trans swaped in at some time.

I don`t know the lengths of the 2 trans. but found this measurement on another thread for the one piece. 16 3/4".

The 240D front section of the DL is 24" as per that thread.


I have both types of transmissions and a front piece of the DL. I can measure them tomarrow.

I don`t know the difference between the auto DL and the Manual DL front section length for the 240. the automatic is a longer transmission than the manual transmission. could be you used the wrong DL?

Charlie
__________________
there were three HP ratings on the OM616...

1) Not much power
2) Even less power
3) Not nearly enough power!! 240D w/auto

Anyone that thinks a 240D is slow drives too fast.

80 240D Naturally Exasperated, 4-Spd 388k DD 150mph spedo 3:58 Diff

We are advised to NOT judge ALL Muslims by the actions of a few lunatics, but we are encouraged to judge ALL gun owners by the actions of a few lunatics. Funny how that works
Reply With Quote