|
You could try chemically dissolving the rubber and then gain access to the bolts.
My 300SD mount was pretty bad, not AS bad as your but not too far. My bolts were 6mm alan bolts, are yours the same or are they standard hex? I dont think theres enough clearance to get a standard hex + socket in there...
A quick google search says Naphta, petroleoum, turpentine, or ether will do the trick, but all of those will dissolve paint as well!
You can keep chipping away at the rubber then get a long 6mm alan socket and have at it. This was not a fun task on my SD even less on the 560SEL
__________________
Cruise Control not working? Send me PM or email (jamesdean59@gmail.com). I might be able to help out.
Check here for compatibility, diagnostics, and availability!
(4/11/2020: Hi Everyone! I am still taking orders and replying to emails/PMs/etc, I appreciate your patience in these crazy times. Stay safe and healthy!)
82 300SD 145k
89 420SEL 210k
89 560SEL 118k
90 300SE 262k RIP 5/25/2010
90 560SEL 154k
91 300D 2.5 Turbo. 241k
93 190E 3.0 235k
93 300E 195k
|