i have made another film, i connected laptop to the lc1 controller, checked programming analog outs... both were programmed as widebands defaults
i updated firmware in cotroller, bocause i thoght, that it could be coused by the firmware error and i connected logworks to the controller. i changed, that when cotroller shows error my output to the ms shows 1.45v, and on the gauge high impedance.... what happened?? no errors, only fals readings... when i cross 13 afr my wideband goes crazy and shows 40-50 afr!!!! hello?? what's going on??
the film:
lc1 and MS3 readings problems....part2.... - YouTube
my whole project with msq and some old logs...
tereska alpha.rar - kubeq_sq - Chomikuj.pl