05-14-2012, 07:13 PM
|
 |
DD MOD, HVAC,MCP,Mac,GMAC
|
|
Join Date: Mar 2006
Location: Mount Holly, NC
Posts: 27,018
|
|
Quote:
Originally Posted by Dave Donaldson
Ok I will check that,,,My effort to describe the condition, is not very good,, I' m a bit worried . so far it's like I turned the key all the way to the right just short of cranking the eng. over,,, so perhaps you are right,, the first place to look and verify, if it shows as the key position condition,,, should I spray it with wd 40 ? or pull it out if this seems to be the problem.. ty
|
be sure NOT to spray wd-40 in there! if you look at the pictures for the ignition assembly under the buy parts tab, you will see the larger round black part at the opposite end from the keyhole. that's most likely what's wrong. when you turn to the start position, and let go of the key, does it spring back?
__________________
John HAUL AWAY, OR CRUSHED CARS!!! HELP ME keep the cars out of the crusher! A/C Thread
"as I ride with my a/c on... I have fond memories of sweaty oily saturdays and spewing R12 into the air. THANKS for all you do!
My drivers:
1987 190D 2.5Turbo
1987 560SL convertible
1987 190D 2.5-5SPEED!!!
1987 300TD
2005 Dodge Sprinter 2500 158"WB
1994GMC 2500 6.5Turbo truck... I had to put the ladder somewhere!
|