View Single Post
  #1  
Old 05-15-2012, 07:16 PM
bigbillyboy bigbillyboy is offline
Registered User
 
Join Date: Jan 2005
Location: portland
Posts: 72
1992 300sd w140 glow relay and idle

As the title states...

1. car went from easy start on first or second crank to very hard starting only when cold. I replaced the glow plugs, as I knew I had at least one failed. New GP's didn't fix the problem. Very difficult to start cold, but one or two cranks is all it takes when warm. I'm assuming that the Glow relay is bad? All the wires were in good shape. Is there a way to test the Relay before dropping $100 on a new one?

2. I know for most of the OM603's the idle can be somewhat adjusted by the rotary thing, but can someone tell me where this is located on the W140 chassis?

Thanks. As always, the forum has saved me a heap.
Jason
__________________
NOW:
1992 W140 300SD 217K total. 70K on 1st 3.5 "Rod Bender" 147K on 2nd - so far no oil consumption
THEN:
1985 300D 395K and running flawlessly when sold - loved this car
1977 Euro spec 300d with manual trans - total dog.
Reply With Quote