TMAllison, I looked up DV o-ring from a 630.960 and the part number is A0179974148. According to EPC parts search this same part number fits many 601, 602, 603, 616, 617 (but not all) engines. I ordered one and it measures 2x15id.
I am in the process of replacing all my orings with viton ones. It's too bad you can't just buy the amount you need (except from fryerpower $27.50) I had to buy 10 of the 2.5x12 & 3x18 just to get one. Your post says that 9-2.5x8id orings are needed but I can only find where 8 of them go. The part number is A6019970345 and the EPC only shows 8 required, can you show or tell me where these size orings go? Thank you
Quote:
Originally Posted by TMAllison
Revising the above data for future reference:
1 shutoff valve 2.5mm x 12mm ID
9 fuel line 2.5mm x 8mm ID (1 located at fuel filter housing)
3 fuel filter housing 2.5mm x 10mm ID
1 pre-filter 3mm x 18mm ID
The above applies to the OM606.962. The OM606.912 should have a very similar count.
Would like size of Delivery Valve o-rings (6) if anyone knows.
|