Quote:
Originally Posted by windjammer
Diesel911, I have to ask someone for help I need desperately to get my 99 300td back on the road. Had the head off for extracting 4 broken GP's. At the same time had a valve job. Prior to removing the head I checked the timing it was less than 1 deg.. Marked chain and sprocket with paint. The head is back on but unable to match the marks, it probably needs another revolution to make it match. The problem, I can't crank beyond a certain point. Going back it stops at a certain point as well. You or someone may have the answer I would much appreciate.
|
The camshaft BASE timing is seriously off.
You need to set the crankshaft back to TDC, and reset the mechanical timing again.
If you need more heavy technical data on the procedure, send me an e-mail with Year, model and VIN#, including a brief description of what is needed.
You have an e-mail waiting on your hotmail account.
.
__________________
ASE Master Mechanic
https://whunter.carrd.co/
Prototype R&D/testing:
Thermal & Aerodynamic System Engineering (TASE) Senior vehicle instrumentation technician.
Noise Vibration and Harshness (NVH).
Dynamometer.
Heat exchanger durability.
HV-A/C Climate Control.
Vehicle build.
Fleet Durability
Technical Quality Auditor.
Automotive Technical Writer
1985 300SD
1983 300D
2003 Volvo V70
https://www.boldegoist.com/