Other pics.
I am going to look through my O-ring assortment and see if I can find one that Fits for when I re-install the Element.
I am going to buy a Can of WD-10 and hose down the Plunger inside of the Pump Housing to clean it off and do the same to the inside of the Barrel.
You could also use Diesel Fuel.
When you install the Element top over the Plunger do not force it even a little.
Re-assembly is the reverse; be sure you line up the Scribe Mark on the Element when you install it so the Fuel adjustment will be as close as possible to what it was.
I added some stuff see post #14
__________________
84 300D, 82 Volvo 244Gl Diesel
Last edited by Diesel911; 08-13-2012 at 09:17 PM.
|