Duct tape and hose clamps with the right diameter sections 3-4 inch that match inner diameter of cooling hose so that you can patch a break - reinforce radiator upper outlet with copper tubing and expoxy (if not already done) 8 mm fuel hose with hose clamps can suffice if you break hard fuel lines -just leave hard plastic material on the nipple and fit rubber 8mm lines. Old school patch repair kit with a good compressor. Belts -change your belts with new and keep old belts. High lift jack and a "come along" i.e manual winch. Tape lens protector material over all headlights/fogs - Vac pump rebuild kit or spare vac pump - SLS high pressure hose -remember that the fittings are reuseable -you could always take a piece of the right hose precut in the right length. 80 amp glow relay fuse, box of nitrile gloves, fuel treatment perhaps . . . . enzyme, startron or other - One sealed container of MB coolant or Zerex G5, JB Weld! Amazing stuff - they have patched holes in tractor crankcases with the stuff, bring sandpaper and a file kit - Have a great time!

Love my seats btw, thanks for the great deal!