Quote:
Originally Posted by SteveH
3. I understand this car has one or two amps, which may be located under the rear seat. This car has the reclining rear seat; is there a sticky on how to remove this rascal? I need to install an after-market head unit, and would like to tie in to the amp(s), but certainly don't want to screw up the rear seat operation. Any advice is greatly appreciated
|
Welcome to the forum!
The seat is not bad to remove. There are two bolts that hold the front of the bottom cushion in place. Remove those, remove the bottom cushion. The bolts are right behind where you legs would be positioned if you were seated.
After that, there are three bolts that hold the back in place. I forget where but look around you'll see em. From there, there are two amps, one on each side. Just cut the wire to the speaker, splice in and there ya go! I did the same thing on my 420SEL.
__________________
Cruise Control not working? Send me PM or email (jamesdean59@gmail.com). I might be able to help out.
Check here for compatibility, diagnostics, and availability!
(4/11/2020: Hi Everyone! I am still taking orders and replying to emails/PMs/etc, I appreciate your patience in these crazy times. Stay safe and healthy!)
82 300SD 145k
89 420SEL 210k
89 560SEL 118k
90 300SE 262k
RIP 5/25/2010
90 560SEL 154k
91 300D 2.5 Turbo. 241k
93 190E 3.0 235k
93 300E 195k