hi

did you take a closer look at the wires in the plug? maybe its possible to remove the wires from the plug without cutting them .

how has your fix worked out for you so far, is the "new" switch working?



its been about 4-5 yrs since i have worked on the alarm microswitches, but if i recall correctly, after separating the door lock cylinders from the

microswitches, when i operated the microswitches by hand, they both worked (engaged/disengaged the alarm) leadin me to believe that the

switches were not at fault , but rather it seemed like the microswitch had made a groove on the outside metal housing of the door lock cylinder , and

that this was causing the intermittent alarm disengagement problem.