Here are a few of mine.

stereo removal key tools
instrument cluster hook tools
B1 piston brake band piston cover remove/install tool

Slide hammer and Pre-chamber adapter
Harmonic balancer puller, five
Timing Chain loader
Fuel Injection master test kit
Tumbler release tools, seven

Mercedes shock absorber tool
Ball joint press
strut socket tool
Slip Joint Removal Tool
Broken bolt - stud extractors, one hundred
Carburetor Adjustment Tools, one hundred forty four
Compression Testers, three diesel and five gasoline
Engine hoist, three flavors

Flywheel locking tool OM61x
Fuel tank socket bit, 22mm.
Glow plug reamer, ALL styles
Groove nut socket
Head bolt triple square, five sets
Injector pop tester
IP delivery valve, splined socket
Pinion nut socket
prechamber lock ring tool pin type, 60X, 61X
Guide Rail Pin Puller
Slide rail pin puller
Socket, serrated for prechamber lock ring OM601, 602,603

Spring Compressor
Homemade Spring Compressor
LCA bushing press, rear wheel carrier, W124,W140,W129,W201,W202
Tank screen socket, 46mm
Tie rod separator tool, many
Timing chain crimper
Timing chain seperator
Transmission dipstick tools
Valve adjustment wrenches, 61X (all three)
60x Timing gear basket

.

__________________
ASE Master Mechanic
https://whunter.carrd.co/

Prototype R&D/testing:
Thermal & Aerodynamic System Engineering (TASE) Senior vehicle instrumentation technician.
Noise Vibration and Harshness (NVH).
Dynamometer.
Heat exchanger durability.
HV-A/C Climate Control.
Vehicle build.
Fleet Durability
Technical Quality Auditor.
Automotive Technical Writer

1985 300SD
1983 300D
2003 Volvo V70

https://www.boldegoist.com/