View Single Post
  #3  
Old 01-06-2013, 01:28 PM
whipplem104's Avatar
whipplem104 whipplem104 is offline
Registered User
 
Join Date: Oct 2008
Location: seattle
Posts: 1,175
Yes, the shift sequences are initiated and pressure controls are through the pwm of solenoids. Once a shift is completed everything returns to a rest state. So you could in essence disconnect the computer from the transmission and it would stay in whatever gear it was in until you cycled the shifter. And then you would be in 2nd only. Commanding shifts is fairly straight forward but it must be sequential and because of this things must be setup properly.
Reply With Quote