View Single Post
  #6  
Old 12-13-2002, 09:51 PM
ILUVMILS's Avatar
ILUVMILS ILUVMILS is offline
Senior Member
 
Join Date: Sep 2002
Location: New Jersey, U.S.A.
Posts: 2,461
Earl, if the O-ring is leaking you're in luck! It's easy AND cheap. With the oil filter removed, just remove the two 6mm allen screws on the fitting(after you dis-connect the heater hose). Pull out the fitting, clean the sealing surface inside the hole, and replace the O-ring. The most expensive part of the job is the coolant. I hope it works out for you. Good luck
Reply With Quote