Yes.

At first I grabbed the front edge with a pair of pliers, and it came out about an inch and stopped. tried to push from under the piece with a screw driver, and finally found this to be futle.

Removed it and with it in my hand I worked with if for a while. there is a pin sort of piece above the square piece that sticks into a hole to hold it in place. It will slide out, but the square piece keeps it from coming out of the striker body. tried to push the square piece down while pulling on the end, but no go.

There has to be a way to replace them, but maybe not. always easier to read how to do a project that actually getting in and doing it. and as anything, there is always a trick to it.

Easier to just remove the strikers from the JY cars and call it good.

Charlie

__________________
there were three HP ratings on the OM616...

1) Not much power
2) Even less power
3) Not nearly enough power!! 240D w/auto

Anyone that thinks a 240D is slow drives too fast.

80 240D Naturally Exasperated, 4-Spd 388k DD 150mph spedo 3:58 Diff

We are advised to NOT judge ALL Muslims by the actions of a few lunatics, but we are encouraged to judge ALL gun owners by the actions of a few lunatics. Funny how that works