Thread: Steering Colum Lock (Ignition Lock Housing) causes Ignition Switch Failure
View Single Post
  #2  
Old 01-24-2013, 06:58 PM
compress ignite's Avatar
compress ignite compress ignite is offline
Drone aspiring to Serfdom
  
Join Date: Feb 2004
Location: 32(degrees) North by 81(degrees) West
Posts: 5,554
Ignition Switch "Thrown,Under the Bus"
1. The Vacuum Shut Off ACTUATOR on the Steering Wheel Lock Housing is
(99.999%) most likely "Oil Infused" due to the Vacuum Shut Off Valve
on the I.P. Being Bad and allowing Oil to be sucked into the Vacuum system.
1a.The unauthorized lubrication underneath the instrument panel MAY not be
the cause of the Ignition Switch's demise...
2.Let's See 1984.........1994........2004........2013
__________________
'84 300SD sold
124.128
Reply With Quote