View Single Post
  #38  
Old 02-06-2013, 08:52 AM
draglink draglink is offline
Registered User
 
Join Date: Dec 2006
Posts: 90
Quote:
Originally Posted by pmckechnie View Post
Slow down a little. You had said earlier that you still didn't have heat with the monovalve disconnected. The ccu can only turn the monovalve on or off. If it is unhooked, it is off. Off = heat. You now have heat with the modified valve, so that means the valve is bad. You can put in a new ccu if you like but I don't think you need it. Never replace parts until you prove they are bad. You have proved the valve is/was bad. The new ccu may not be as good as the one in there now. Fix/replace the valve and go from there.

Paul
Hey Paul,

I have replaced the monovalve twice. This last time there was nothing with the valve but at $15 for the new valve I figured it was worth a shot. It did not fix the problem. Now with the modified valve in I have full heat, I believe the CCU is bad, tellinig the monovalve to close when it shouldnt. New CCu should be here by weeks end so I will let yall know. In the meantime I am enjoying full heat!!
__________________
'89 300SE
'02 E320 Wagon
Reply With Quote