7) Remove the glovebox light by pulling downward on the light, unplug the light.
8) Slide the glovebox liner out. You will need to pry the middle of the top downward slightly to get it to slide out.
9) Remove the RH vent from the dash: Through the glovebox, reach your left hand in. Using light pressure toward you, push the ductwork and vent toward you. While keeping this pressure, use your pick to pry the 4 retainer clips inward from inside the top and bottom of the vent. They are metal spring-clips with a hole in the middle, best to use a pick or jeweler's screwdriver to pry one at a time inward until all have released. It might be necessary to do each one more than once until the vent is out far enough to pull it free of the duct. Remove the light from the vent by pulling it directly out.
Demonstrating how to pull down on the tabs and the location of the tabs
10) Reach in to the glovebox opening and un-plug the speaker wires, the plug should be wrapped in foam, green and black (Gruen und Swarz) wires.
11) Remove the two 8mm bolts at the bottom of the dash.
There are two machine screws hidden by the vent. The two bolts on the underside of the knee panel are easy to see
After removing the screws for the glow box door and the two on the sides of the glove box the knee panel can be removed