Quote:
Originally Posted by littlehandegan
Brining it back to life. I have an 85 300d turbo.
Got the 1 meter of line from my dealer.
Install goes like this?
Remove old line by slipping off on both side -
Cut new line to size
Slip on
That all?
|
I use a long handle pair of needle nose pliers with angled end, and I grab the side if the hose where it touches the injector, and pinch it off. this cleanly removes the old hose from the nipples, and is easier than pulling it off, then digging for the little bits that remain.
I then use the needle nose to push the new hose on.
I like to use a section of 1/8" weed eater fuel hose so I can see bubbles from the injectors to see if there is a leaker generating air...