[QUOTE=Diesel911;3153381]
Quote:
Originally Posted by Meles
I am finding this confusing as the Injector should have already been removed before the Prechamber Retaining Ring and the Prechamber can be removed.
Also were you useing a Real Prechamber Pulling Tool or similar to in the Picture. The 22-1 threads is for the Prechambers that have a Slotted Retaining Ring the 22-1.5 is for the Prechamber (angle Injection) that uses the Serrated Prechamber Retianing Ring and the Injector Screws directly into the top of the Prechamber.
I also think it takes a Slide Hammer like is in the Pic to do a decent job pulling the Prechambers.
|
I miswrote. The retaining ring was a pain to get off. I used a 50/50 mix of acetone/atf and let soak overnite. Used plumbing torch on metal before putting penetrant around. Ditto on prechambers. Wipe up mixture and blow torch again right before breaking loose.
I've got a slide hammer setup, but the adapter is stripped. I am sure that if the stripped adapter were welded to the old prechamber, it then would be able to pull it out. I am not familiar with welding so not sure if the tools could get into the front prechamber.