View Single Post
Old 06-11-2013, 11:21 PM
Diesel911's Avatar
Diesel911 Diesel911 is offline
Registered User
Join Date: Sep 2007
Location: Long Beach,CA
Posts: 35,933
I did not replace My Rear Window but I took it out to repair the Rust hoes at the bottom corner.
Since I found a whole bunch of busted Glass bits under ther rear Deck and Rear Seat I assume the original Window was butsted and from the looks of the Rear Window it was a Junkyard replacment.
I reused the Rubber Seal as it was OK.

I used the 2 types of Suction Cups to help move the Window around and those Blue Plastic Harbor Freight Door Panel Tools (I have 2 sets) to pry with.

I did not use and sort of Rope or Cord to pull or a Window Remover Tool to cut the Seal. But in My case the the Rubber was not stuck on with Sealant.

Put a Blanket or somethng on the top of the Trunk so that the Glass has something soft to rest on.
Attached Thumbnails
Installing back glass (with defroster), help needed-suction-cup-1b-jun-13.jpg   Installing back glass (with defroster), help needed-suction-cup-2b-jun-13.jpg   Installing back glass (with defroster), help needed-suction-door-panel-toolsb-jun-13.jpg  
84 300D, 82 Volvo 244Gl Diesel
Reply With Quote