Ma'h Silveraddooo.



When these things came out I took one look at them and was disappointed by the indented "eyebrows" over the wheel wells, They are a styling glitch that should have not been put on these trucks. I told myself- whenever i get my hands on one of these-the eyebrows would be removed. I wouldn't try cutting and hammering them out and rewelding. Im just using the old standby, Marine -tex.




I got my $41.00 poxy pooky kit here, but first i have to take care of the regular bodywork-- the BeaT UP Bed.
This truck -a typical work truck from here -- They like to beat them up as a hobby. The bedsides are made of pretty flimsey stuff for such a wide -long expanse , acres and acres.
This pickup incurred a severe trauma the the driver side, looks like someone lost control in a icy sleet coverd road and smacked a telephone pole sideways leaving a giant kink from top to bottom behind the fuel filler door. then the nimrods got some 2x4s and sorta somewhat pried it back out- with no backup board against the inside dent surface, so it had thes 2x4 corner dents all pried into the dent bumping it out here and there,

It was a f-nn mess!
The passenger side was just the usual lower rear beang crunched which I easily took care of with short boards and c-clamps and long vice grip clamps- pulling the metal back into line.


IMAG0425.jpg (3 of 5)06-29-2013 02:03 PM