I need the vibration damper off the front of the motor, it is sandwiched in between the lower pulleys and the harmonic balancer which is attached to the crankshaft.

#19a in the attached diagram

It is held on by six allen head bolts which first go through the pulley, then the damper, threading into the harmonic balancer. The allen head bolts are known to be rusted and then strip out when you try to remove them. if that happens you can knock the heads off the bolts with a long air chisel. there are no threads in the damper part, it is just sandwiched between the pulley and the harmonic ballancer.

Give me the pulley also, It looks like it may be a one piece unit from the diagram, either way I want it.

So please send me a PM with your price for the vibration damper and pulley
plus shipping to the Chicago, IL area. I think the weight should be between 10 and 20 pounds.

Thanks, Ive been looking for one of these.

Attached Thumbnails

 

__________________
1983 240D 4spd
1984 300D Euro 4spd non turbo
1982 300D Parts Car (bad auto trans)
1982 240D Parts Car (blown motor)