Quote:
Originally Posted by Flashcool
Hello 95e300dwez
I'm converting my OM606 N/A from my 95 124merc to turbo.
I have got already this 606 turbo parts:
intake manifold
exhaust manifold with turbo
prechambers + nozzles
nozzles will get a rebuild
pistons + rings + rods
oil filter housing
Bearings I will buy new for OM606 LA engine.
I have also got the camshafts from turbo, but i will leave my N/A camschafts.
Do I need anything else?
Thanks for help
|
I only have the turbo piston and rods and will be setting the new rings to the turbo spec. The rest of your parts are really not critical if you ask me after looking at the inside of my motor and comparing it to the 98 I took the piston and rods out of. The injectors have a higher pop pressure but I don't think there is a different prechamber for the turbo motors.