Quote:
Originally Posted by Flashcool
Prechambers have a different MB part number.
Where did you get your oil feed for turbo from and where is it going after turbo?
And what oil pan are you using?
Thanks a lot!
|
Oil feed I just tapped the oil pressure output to npt and put a T fitting one side for feed other for pressure gauge. The return I drilled in the side of the block not much higher then needed about a inch of the pan gasket. I will post some pictures.
I am using the stock pan might get rid of the coolant passage that enters on the passenger side. I will also take some photos of the 2 oil pumps the 95 is all metal and beefier looking then the 98.