Quote:
Originally Posted by DeliveryValve
Can you post a picture of the location of this "A"?
.
|
After some searching through Stretch's and my threads I finally found a picture which had the location visible.
You can see the machined flat just to the right of the shiny locking tool.
This is a closeup of the tool, but you can see just to the right the markings on the flat. The first marking is the "A."
Sometimes you do have to clean that surface off. The box in the picture was completely stripped of grime and wasn't repainted before it was installed. I say this because the markings are shallow enough that paint can obscure them.