Quote:
Originally Posted by cho
11-5=6 .... did you go with 4 key?
.
|
Doing this sort of check is not the same as doing the 2mm Method so you would not be using the 2mm Method Specs.
I have not checked it recently but it is on about 2.5 degrees after OT (Top Dead Center) and the closest Offset Key is for 4 degrees.
All the Number in the pic above Zero are after top dead center. So in My case the Pointer does not quite point to 2.5 ATDC but I think that is due to the Camera Angle. So I am not yet a candidate for an Offset Woodruff Key.
If it was 4 or more degrees ATDC then I would be a candidate for the Offset Key. I would also do the 2mm Method go be sure.
But here is the Bugger. I have also not checked to see if some Previous Owner installed an Offset Key.