Quote:
Originally Posted by Ether
....................... I have not been able to capture what that reading is during one of the times when the heat works normally to see if it is different.
So I have some data but I still can't put together an explanation for the intermittent nature of this problem. If anyone has ideas or experience with this type of issue please weigh in and tell me what I'm missing.
|
Make a small 12V light bulb with light gauge stranded wires, unplug monovalve connector, wrap the wires around the monovalve terminals, add some tape so it won't unravel. Put connector back on, run the bulb out the hood so you can see what's going on with voltages to the monovalve.
Edit: Very important to make sure the wires don't unravel and short out, which will blow CCU trace.