Originally Posted by Dan Stokes

I thought I addressed that. The firewall and scattershield are REALLY close there and I really can't get a line out of there never mind fitting in the sender which is about 2 1/2" in diameter. Believe me, I tried. I had an adaptor and a 90* elbow in that spot that I installed before the trans and scattershield were in place and I had to cut off the elbow to get the adaptor out.

So is the oil filter top a better spot than the cooler line? I'm thinking yes if those lines are temp controlled. And thanks for that possibility - I probably wouldn't have thought of that. I can just drill and tap for that, I think. Worst case is I'll have a lump welded on to make a thick spot for that.

Dan