Yikes! I don't have an inch/lb torque wrench with a dial gauge on it. However, I do have a very high quality one. I viewed a pictorial on doing one, and it emphasized the marking of the flange and the nut precisely. In doing this and with my testing procudures with the torque wrench, I feel I should not have any issues. There is an actual torque for the pinion bearing. I ran on to it searching on someone else doing the project several months ago. First, I need to verify if the bearing is good or not. If it is not, I will not attempt the project until this fall. I don't like to tackle a 3rd end in the summer heat!

__________________
Rebe