Thread: Best way to clean out the A/C evaporator and heater core?
View Single Post
  #22  
Old 08-05-2014, 06:22 PM
okgolti okgolti is offline
Registered User
  
Join Date: Jun 2011
Location: I now live in Northern Virginia and intend to stay for good.
Posts: 15
Quote:
Originally Posted by BenzTurbo View Post
found a pic from about a month ago of my w123's evap. i cleaned it over a year ago and it's staying clean. the air volume is VERY good with all vents open. before i cleaned it, i always closed the passenger vents in the summer because it was a pathetic amount of air flow. the coil clean has a good smell too not a chemical smell, but a new window air conditioner smell

I noticed from this picture and the 2 others you posted earlier,
that the shots were taken from the same opening or access.
Was this opening big enough to fit a hand into it with a toothbrush
and a foam spray cleaner (no-rinse) to clean the fins?

Any tips you can share in taking down the blower motor?

I have a 300D 1984 USA model to work on and I've been gathering
pointers from Brian Carlton from another forum of a similar subject.

I also want to replace the motor brushes if I can find a good source.
Any tips on this too?

I'll look forward to your answers.

Thanks.
Reply With Quote