Well would you look at this.

Water Temp going into Radiator is 180 and heater hoses are at 180 and thermostat housing is at 180. So tried Motorheads idea and used old temp sensor and pot of hot 180 water and temp gauge shows 95. SOOOOO I guess I have a bad temp gauge not an overheating problem at all. Next time I’ll try this method first. One must be sure that ones gauge is actuate FIRST! This one had me going in circles, since it started with a radiator flush and went down hill from there. Any one have a good temp gauge?

Thanks for all your Ideas.

Bill