View Single Post
  #2  
Old 10-03-2014, 11:43 AM
masc243 masc243 is offline
Registered User
 
Join Date: Oct 2013
Location: Tampa FL
Posts: 104
Quote:
Originally Posted by Prospector View Post
Over the past few weeks, I've been thinking it was time to do brakes on the car. Things just didn't seem 'right' but i couldn't put a finger on it.

Last night I did my first oil change, and everything went well. Afterwards, I noticed a few drips on the ground and cussed myself for not being careful, then went for a drive around th eblock and found I had about 1/3 the stopping power I normally do. That was weird.

This morning the brakes were even softer.

When I got to work I popped the hood and noticed fluid leaking between the reservoir and brake booster. No wonder the brakes are going soft. I wonder if I leaned on something when I did the oil change and made a small problem bigger.

Anyways, I am now faced with a decision - according to ************** I should replace the booster and master since th efluid will bugger up the booster if it goes inside it. OTOH, best case would be that I only have to replace the gasket between the master cylinder and the brake booster.


I can't afford to be without wheels for more than a day or two. when I dig into this, how deep should I plan on going? Anyone else been through this?

I just ordered all the stuff for interior dashboard repairs. It doesn't rain but it pours. Good thing I got the garage cleaned out.
Are you certain the master cylinder has failed. The reservoir quite literally just pops into 2 large grommet type seals and is held in place by friction. Maybe it was inadvertently popped off.

If the master cylinder were to fail, I don't really believe you would see fluid at the mating gasket as the fluid would be filling inside of the booster.

If the master cylinder truly has failed, Most will say, don't take chances with brakes, and I agree; You should replace the booster.
Reply With Quote