If you are at all handy with a low wattage soldering iron, the bulb can be replaced with an LED for a dime or less.
Pull the bulb from the cluster. Carefully lift the glass bulb out of the housing. Unsolder the leads and solder in the LED. Plug it in and check it. If it doesnt light, rotate it 180 degrees.
Folks can argue all they want about which side the resistor should go on. At the end of the day, it makes no difference, just that its there

__________________
1985 300D 198K sold
1982 300D 202K
1989 300E 125K
1992 940T

"If you dont have time to do it safely, you dont have time to do it"

"The democracy will cease to exist when you take away from those who are willing to work and give to those who would not."