All:

It turns out the reason my leg room flap vacuum actuator was not getting enough vacuum pressure was that the throttle/orifice in the line just before the actuator was restricting too much flow. My vacuum lines were a little wonky at the check valve as well, so I put them where they belong, and then removed the throttle/orifice, and the legroom flap opens and closes as designed. I will order a new throttle/orifice and install it before I use the system, but at least now I know why it wasn't working.

Thanks to you all, your input and suggestions got me to where I needed to be, and without your guidance I probably would not have been able to sort it out.

__________________
Will



72 280SEL
85 300CD 288k
00 E320 Wagon 4-matic 100k
11 E350 Wagon 4-matic 45k

73 VW Westfalia Camper
67 VW Westfalia Camper

66 Porsche 912