Quote:
Originally Posted by pj67coll
There's a HF just down the road from me. Are you saying they give these things away?
|
If you go to the HF website, you should find a coupon you can print off that gets you one free or almost free.
Like this:
http://www.dealsoff.com/images/multimeter-0301.jpg
More coupons in this list:
http://www.dealsoff.com/harbor-freight-coupons/
Quote:
Originally Posted by pj67coll
When measuring these is that with the key turned on to the glow position?
|
No. You want to measure the resistance by putting the red lead into each female receptacle in the large plug at the end of the harness that runs from the relay to the glowplugs. The black lead goes to a good ground, preferably the negative battery terminal if the lead is long enough. The engine block is NOT a good ground.
Before anything else, check that you can hear the relay engage when you turn the key to the preglow position. If you don't hear it click, try tapping it on the side or on top. Also make sure that the strip fuse inside the glow relay is intact.