Quote:
Originally Posted by demet
ah this is interesting, thank you. but when you say the "three bolts that secure the motor to the gear frame" - do you mean the three i already removed that attach motor/gear to the door ?(actually i guess i only removed the nuts).
or are there three specific bolts that attach motor to gear? i'll look for them tomorrow, but after reading dozens of posts and instructions, this is the first i've heard of this possibility. it would be great if i could do as you say!
|
At the upper end of the motor/motor bracket (visible in your third thumbnail) there is a triangle (about 2" on a side) of bolts and/or studs & nuts. Even with the low resolution of the thumbnails I think that the bolt in the upper point of the triangle can be seen. In any case, put a mirror behind the aluminum regulator frame where the motor is attached to it. The blind end of the bolts/nuts will be visible in the mirror. Since the glass is up, the bolts/nuts are accessible; albeit in tight quarters.