|
Now that I've got into the project a bit I can see there is a difference to what the two sources are referring. The Hayne's manual is actually referring to the gasket between the water pump housing and the engine block, while the instructions that came with the water pump are referring to the gasket between the pump and housing.
Since I'm having to scrape off the housing gasket, I can assume it was installed with sealer. The pump gasket came off easily, so I'm guessing it had no sealer. I'm going to install gaskets the way I think they were done before.
Thanks for the replies. I'll let you know if there are any leaks.
__________________
Dave
1995 C280
1999 Triumph Daytona 955I - my speed fix.
1982 300TD - Gone, but not forgotten.
|