Thread: Limp mode
View Single Post
  #2  
Old 06-16-2015, 09:00 AM
whipplem104's Avatar
whipplem104 whipplem104 is offline
Registered User
 
Join Date: Oct 2008
Location: seattle
Posts: 1,186
I am guessing you want to trip a factory limp mode. You could do a few different things but they are all going to trip a check engine light. The best scenario would be to ground all the coil wires. So Take all three ground sides on the coils and tap into them and commonly ground the wires when you want. This will act just like a rev limiter. You could also short out the tps sensor. You are going to have to reset by stopping and turning the car off and starting again. So I do not recommend these as it could be unsafe.
Reply With Quote