Quote:
Originally Posted by Maxbumpo
Mach4, your posts go back and forth between deg F and deg C. My point: did your test in post #8 really measure from 0 deg F to 80 deg F? That doesn't seem like much of a test to me, but perhaps you were using a "less than set-point" temperature to avoid damaging the t-stat?
|
Sorry about the C-F dichotomy...I have my Gauges reading in Degrees F but MB references everything in C.
Yes, ambient was 80F and the freezer was 0F. The manual talks about not removing the thermostat module above 60C (there we go again) so I was just testing to see if I could get any discernible movement in the plunger across a 80 degree temperature delta.