Quote:
Originally Posted by vwnate1
Looking mighty good! .
Can you write up info on the sway bar bushings ? .
One of my cars has soft ones and I'd like to replace them , with Polyurethane if possible .
TIA ,
|
Thanks!
I can try but the best is the FSM Section on replacing the Torsion Bar. I don't remove the booster, it takes more time to get a wrench in their but its possible.
Pretty much, its just keep weight off the front tires, remove battery tray and then the U bracket that holds the bushing/bearing onto the torsion bar, add some dish soap, place the bushing over the torsion bar and then tighten. The one under the booster is the same.
http://mb.bolinko.org/wis/w123/CD02/Chassis/32-300.pdf