Stretch - In the picture below, you don't have a lead connected to the COM port. You always have the black lead in the COM port and then you move from the main + port to the 10A port when you want to measure above 400mA.
From the manual:
Quote:
3. For current measurements up to 400mA, set the function switch to the mA position and insert
the red test lead banana plug into the mA/μA jack.
4. For current measurements up to 10A, set the function switch to the 10A range and insert the
red test lead banana plug into the 10A jack.
|
__________________
Graham
85 300D
,72 350SL, 98 E320, Outback 2.5