I was a bit nervous about this whole thing..Maybe that is why I haven't been posting for a while..

I finally took it for a 2 mile ride..I had been rebuilding the front end for the longest time and finally done with that..

I won't get into the details of how the tranny did..but I am all smiles!!
I will let everyone know after all the posts are complete on how it shifted and performed..but am i relieved!!

So lets get back at this..
Rear piston install
first 2 pictures from the manual..This manual is very detailed..Like I said earlier, I printed it completely out and had each page as needed open in front of me at each stage of the rebuild

Third pic shows the updated guide bushing installed
Forth pic is the seal..comes in the master kit..That updated guide bushing is purchased separate.

Final pic shows the piston with the new plastic seal ring installed..seal ring is with the master kit..

Attached Thumbnails

         

__________________
1978 300SD 303400 miles
1983 300D 341270 miles
1980 300SD 320456 miles