I adjusted the valves over the weekend. It was an enjoyable exercise, that would have been more enjoyable had it actually resulted in the car starting. Still no luck. FWIW, when I did the valve adjustment, the exhaust valves all seemed fine, while the intakes were all too tight (clearance too small) and needed a bit of adjustment.

Next step (probably should have done this earlier) is to change the fuel filters. I THINK my filters are OK because I do seem to be getting fuel to the injectors, but it can't hurt. Otherwise, I'm at a loss of where to go from here.

__________________
-Scott J
1978 240D