Quote:
Originally Posted by Rick76
Your exit lamp is not the source of your bulb out indicator coming on. Those bulbs are not monitored.
The reason you have 12 volts on both sides of the non-functioning exit lamp is that it is not getting a ground through the door switch. It could be the switch itself or a broken wire going to it. The wires sometimes break from flexing when the door opens, however the rear doors don't get as much use as the fronts. If you have moisture getting in, there might be corrosion in the switch.
Try grounding the brown/gray wire to see if your exit light comes on.
|
Quote:
Originally Posted by Rick76
Check your license plate lamps. I missed those once on my car.
The bulb monitoring unit is only for external lamps.
|
Both are excellent suggestions, I will take a look at the tag light again, thought I had checked them before but I didn't yesterday. I'll report again...
Dale
__________________
Dale
1995 E320 Wagon 185K [SOLD]
1988 260e Sedan 165K
2007 F-150 XLT 188K [SOLD]
2003 Harley Davidson FLTRI Anniversary 26K ----------------------------- 2006 BMW 330Ci 110K - [SOLD]
|