I made a system to pre-lube mine. It uses an old pressure cooker that I fill with oil and then pressurize with my air compressor. The air sits on top of the oil and forces it thru the oil passages by way of the oil galleys. There are pics on my build thread. Maybe one of the guys can make a link - I'm useless at that kind of stuff.

If you were closer I'd lend you my pre-luber but we're on opposite coasts. However, there are certainly systems near you. Modern LS engines and other require pressure pre-lubing as many modern engines can no longer be pre-lubed by spinning up the oil pump drive. I'd try any of your local speed shops and likely they can help you out.

Dan