Quote:
Originally Posted by HuskyMan
Now that it is out, I have another issue. I'm purchasing an alternator with no drive pulleys so I have to remove the drive pulleys off this old alternator. Any ideas on how to remove the pulleys? Do I spray PB blaster than try to break the nut loose???
|
Soaking in advance with PB Blaster is helpful.
Removing the pulley can be done with simple hand tools.
I used a combo wrench and one of the old alternator bolts, see post # 2 on my alternator update thread.
DIY - AL129X alternator in a 1978 W116 300SD