Quote:
Originally Posted by Rogviler
Out of curiosity, what exactly is one supposed to see in the lines? I pictured a steady stream of fuel, but there doesn't seem to be much of anything, really. Under what condition does a lot of fuel get returned from the injectors?
Anyway, clear lines are interesting to look at, that's for sure.
-Rog
|
Initially the lines were filled with air and droplets of fuel dancing around inside with every injection cycle. After 100+ miles all the tygon lines are filled with fuel. I can't see any air bubbles inside.
I'm worried about the low temp rating (165f) of the tygon especially on the om606 where they're covered up so I picked up some viton hose just in case. I'm going to keep an eye on them. So far the injector Wells are dry.